Interstate Pneumatics G2112-300 2" 300 PSI 1/4" NPT Rear Mount Pressure Gauge

Interstate Pneumatics G2112-300 2" 300 PSI 1/4" NPT Rear Mount Pressure Gauge Review

Interstate Pneumatics G2112-300 2" 300 PSI 1/4" NPT Rear Mount Pressure Gauge Feature

• Range: 0-300 PSI
• Dial Diameter: 2"
• Case/Bezel: Black
• Port Size / Port Direction: 1/4" NPT - Back Mount

Interstate Pneumatics Pressure Gauges are extremely high quality pressure gauges. Tough construction with a 2" diameter white face. It is made tough to last and has a 2" diameter white face place for easy reading. Used for air, water, oil or other fluids, compatible with brass and bronze. Pressed steel case with shatterproof crystal and brass fitting. Mounting can be either bottom mount or center back mount. Gauges are available in pressure only, vacuum only, or compound both pressure and vacuum.

BEA DPG50 Door Pressure Gauge 0-50 lbs.

BEA DPG50 Door Pressure Gauge 0-50 lbs. Review

BEA door pressure gauge for automatic doors

IIT 10200 Air Regulator with Gauge

IIT 10200 Air Regulator with Gauge Review

IIT 10200 Air Regulator with Gauge Feature

• Adjustable from 0-160 PSI
• Built-in gauge
• 1/4" NPT Fitting

To get more control over air pressure for more efficient operation, get this Air Regulator with gauge. Just attach between the air supply source and air tool such as spray gun for instant pressure control. For more or less pressure, use the adjustable dial. Essential for many paint sprayers, nail, and staple guns. Large easy to read dial. 1/4" NPT threads.

Jones Stephens Corp. G64-030 Gas Test Gauge Assembly

Jones Stephens Corp. G64-030 Gas Test Gauge Assembly Review

Jones Stephens Corp. G64-030 Gas Test Gauge Assembly Feature

• G64-030 30PSI GAS TEST GAUGE
• 30PSI GAS TEST GAUGE 3/4INLET

Adapts to 3 4" M.P.T. 2" steel case gauge, plated body with 3 4" F.I.P. inlet, brass air valve. Individually boxed. No. G64 015: 15 lb. No. G64 030: 30 lb.

Door Pressure Gauge

Door Pressure Gauge Review

Door Pressure Gauge Feature

• Range is from 0-35 Pounds

Range is from 0-35 Pounds Door Pressure Gauge instrument design specifically to measure force. OPERATING INSTRUCTIONS Set the top (small) o-ring located on the plunger rod on zero, down against the instrument's flange; or set the o-ring on the desired force. Holding the instrument firmly, press slowly against the door at a point approximately handle-high, and 30 inches away from the door's hinges. Read the amount of force required to open the door on the plunger scale closest to the bottom of the small o-ring. MEET ADA REQUIREMENTS The Americans with Disabilities Act requires that both interior and exterior doors of a building be handicapped accessible. Door Opening Force (4.1311 ADAAG). Exterior hinged doors: (Reserved) Interior hinged doors: 5 lbs (22.2N) Sliding or folding doors: 5 lbs (22.2N) Automatic/Power Assisted Doors: (4.13.12) Such doors shall not open to back check faster than 3 seconds and shall require no more than 15 lbs (66.6N) to stop door movement. If a power assisted door is used, its door-opening force shall comply with 4.13.11 and its closing shall conform to the requirements in ANSI A156.19-1984.

Air Tire Inflator w/ 120PSI Gauge & 12 Hose for tires"

Air Tire Inflator w/ 120PSI Gauge & 12 Hose for tires" Review

Air Tire Inflator Gas Station Style. 6" Chrome Plated Steel Dual Chuck. Cast Aluminum Alloy Body w/ HD Brass Valves. Easy to Read Pressure Gauge Measures 10 ~ 120psi in 2lb Increments. 12" Heavy Duty Rubber Hose. Female 1/4 NPT. Air Inflator Provides User w/ Easy & Controlled Inflation.

5 Gallon Portable Air Tank

5 Gallon Portable Air Tank Review

5 Gallon Portable Air Tank Feature

• 1/8" NPT male fitting
• 125 PSI max
• Includes: Tank, hose, gauge and tire chuck
• Size: 9-3/8" D x 16-3/4" L
• Zinc air chuck

This portable air tank is ideal for airing up tires, footballs, air mattresses, toys, etc. Stores out of the way in your car, truck, SUV, garage or home. Portable air supply where and when you need it. High visibility air pressure gauge.

Interstate Pneumatics TG2308 2 Inch 0-160 PSI 6 Inch Dual Foot Chuck Dial Pressure Gauge

Interstate Pneumatics TG2308 2 Inch 0-160 PSI 6 Inch Dual Foot Chuck Dial Pressure Gauge Review

Interstate Pneumatics TG2308 2 Inch 0-160 PSI 6 Inch Dual Foot Chuck Dial Pressure Gauge Feature

• Range (PSI): 0-160
• Division: 5 PSI
• Range (KPa): 0-110
• Division: 20 KPa
• Chuck: 6 Inch Dual Foot

Interstate Pneumatics Dial Pressure Gauges feature a 2" dial gauge with large easy to read markings in black (PSI) and red (KPa), chrome plated or solid brass fittings, 12" oil resistant hose, a bleeder valve for relieving pressure, and a rubber boot to protect the gauge from shock damage. These gauges provide extreme accuracy and long life in the most rugged applications.

Interstate Pneumatics G2012-015 2 Inch 15 PSI - 1/4 Inch NPT Bottom Mount Pressure Gauge

Interstate Pneumatics G2012-015 2 Inch 15 PSI - 1/4 Inch NPT Bottom Mount Pressure Gauge Review

Interstate Pneumatics G2012-015 2 Inch 15 PSI - 1/4 Inch NPT Bottom Mount Pressure Gauge Feature

• Dial Diameter: 2"
• Delivery PSI: 0-15
• Inlet Thread: 1/4" NPT
• Mounting Type: Bottom Mount

Interstate Pneumatics Pressure Gauges are extremely high quality pressure gauges. Tough construction with a 2" diameter white face. It is made tough to last and has a 2" diameter white face place for easy reading. Used for air, water, oil or other fluids, compatible with brass and bronze. Pressed steel case with shatterproof crystal and brass fitting. Mounting can be either bottom mount or center back mount. Gauges are available in pressure only, vacuum only, or compound both pressure and vacuum.

Digital Tire Gauge and Multi-Tool by Princess International - DT-408 (Black) (6.5"L x 1"W x 1.5"D)

Digital Tire Gauge and Multi-Tool by Princess International - DT-408 (Black) (6.5"L x 1"W x 1.5"D) Review

Digital Tire Gauge and Multi-Tool by Princess International - DT-408 (Black) (6.5"L x 1"W x 1.5"D) Feature

• Color: Black
• Size: 6.5"L x 1"W x 1.5"D
• 3-Mode tire gauge: PSI, BAR, KPA (3 to 150 PSI)
• Includes LED flashlight & red LED light
• Multitool - pliers, flat and Phillips screwdrivers, scissors, seat belt cutter, and glass hammer

This tire pressure gauge and multitool is compact and fits neatly in your glove compartment, so you're ready for anything!  Ideal for cars and trucks, the tire gauge features a blue back lit display, white LED flashlight, red LED light (to see tire nozzle in the dark) and 3 modes: PSI, BAR, KPA (3 to 150 PSI).  The multi tool includes pliers, flat and Phillips screwdrivers, scissors, seat belt cutter, and glass hammer.   Assembly level/degree of difficulty: No Assembly Required.

Pressure Gauge Reducing Coupler - 1/4in. to 1/8in. Size

Pressure Gauge Reducing Coupler - 1/4in. to 1/8in. Size Review

Used with 4in. gauges. Fitting Size (in.): 1/4 x 1/8, Max. PSI: 3,000

Campbell #BPG-100 100 PSI Brass Pressure Gauge

Campbell #BPG-100 100 PSI Brass Pressure Gauge Review

Campbell #BPG-100 100 PSI Brass Pressure Gauge Feature

• Campbell #BPG-100 100 PSI Brass Pressure Gauge
• CAMPBELL MFG LLC
• CARDED
• Commonly attaches appliances that use disposable cylinders to a hose
• Propane brass fitting

100 PSI Brass Pressure Gauge, 2" Diameter, Dial Casing With 1/4" Solid Brass Mount, Analogue Dial Measures From 0 To 100 PSI, For Use On Non-Corrosive Applications.

Fluke 700P27EX Gauge Pressure Module, 300 PSIG

Fluke 700P27EX Gauge Pressure Module, 300 PSIG Review

Fluke 700P27EX Gauge Pressure Module, 300 PSIG Feature

• Compatible with Fluke intrinsically safe calibrators such as the 718Ex
• Range: 0 to 300.00 psi;0 to 2000.00 kPa;0 to 20.000 bar
• Features internal temperature compensation from 0 to 50 Degree Celsius for full-accuracy performance
• Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
• Calibrate locally with Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source

I.S. PRESSURE MODULE, 300 PSIG

Dual Water Gauge - Pressure (PSI) and Flow (GPM) in One

Dual Water Gauge - Pressure (PSI) and Flow (GPM) in One Review

Dual Water Gauge - Pressure (PSI) and Flow (GPM) in One Feature

• Measures Water Pressure in PSI (Pounds per Sq. Inch) : 0 - 160
• Measures Water Flow in GPM (Gallons per Minute) : 0 - 13
• 3/4" Brass Gate Valve
• Fits Any Standard Hose Bib
• Large Numbers for Easy Reading or Photography

You'll never be missing a hose or adapter when you rely on this self-contained unit. Its long-lasting copper fitting is designed to fit any standard hose bib. Water flow and water pressure are both controlled by the 3/4 inch brass gate valve.

Campbell Hausfeld RP330000AV 12 Volt Digital Tire Inflation System

Campbell Hausfeld RP330000AV 12 Volt Digital Tire Inflation System Review

Campbell Hausfeld RP330000AV 12 Volt Digital Tire Inflation System Feature

• Save time and money, and help improve the environment, with proper tire inflation
• Store or use in upright or flat position
• Plugs into cigarette lighter or 12 volt port
• Ideal for quick and easy inflation of vehicle tires, bike tires, sports balls
• 3 inch digital gauge monitors inflation progress

Includes 12-Volt Inflator - RP3300, (2) Lights - Work Light and Flashing Emergency Light, (2) Inflation Needles, 2-ft Hose, 10-ft Power Cord

Fluke 700P09 Gauge Pressure Module, Isolated, 0 to 1500.0 PSIG

Fluke 700P09 Gauge Pressure Module, Isolated, 0 to 1500.0 PSIG Review

Fluke 700P09 Gauge Pressure Module, Isolated, 0 to 1500.0 PSIG Feature

• Gauge pressure module has one pressure fitting and measure pressure with respect to atmospheric pressure
• Range: 0 to 1500.0 psi;0 to 10000.0 kPa;0 to 100.000 bar
• For use with Fluke 700 Series Process Calibrators
• Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
• Calibrate locally with Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source

PRESSURE MODULE 1500PSIG

Ampro A1430 Tire Inflator with Gauge

Ampro A1430 Tire Inflator with Gauge Review

Ampro A1430 Tire Inflator with Gauge Feature

• 10-120 lbs. pressure gauge with easy-to-read scale and 2lb. Increments
• 12" heavy duty rubber air hose, 1/4" female
• Cast aluminum alloy body with heavy duty valve to resist corrosion

Ampro's Tire Inflator w/Gauge with an easy-to-read scale with pressure from 10-120lbs is perfect for the home or shop. It is cast aluminum alloy body with heavy duty valve to resist corrosion and has a 12' heavy duty rubber air hose.10-120 lbs. pressure gauge with easy-to-read scale and 2lb. Increments12' heavy duty rubber air hose, 1/4' femaleCast aluminum alloy body with heavy duty valve to resist corrosion