Interstate Pneumatics TG2135 2 Inch 0-15 PSI Tapered Angle Chuck Dial Pressure Gauge

Interstate Pneumatics TG2135 2 Inch 0-15 PSI Tapered Angle Chuck Dial Pressure Gauge Review

Interstate Pneumatics TG2135 2 Inch 0-15 PSI Tapered Angle Chuck Dial Pressure Gauge Feature

• Range (PSI): 0-15
• Division: 1/2 PSI
• Range (KPa): 0-100
• Division: 5 KPa
• Chuck: Tapered Angle

Interstate Pneumatics Dial Pressure Gauges feature a 2" dial gauge with large easy to read markings in black (PSI) and red (KPa), chrome plated or solid brass fittings, 12" oil resistant hose, a bleeder valve for relieving pressure, and a rubber boot to protect the gauge from shock damage. These gauges provide extreme accuracy and long life in the most rugged applications.

Watts 0007752 Water Pressure Reducing Valve 3/4"

Watts 0007752 Water Pressure Reducing Valve 3/4" Review

Watts 0007752 Water Pressure Reducing Valve 3/4" Feature

• "WATTS" WATER PRESSURE REDUCING VALVE
• Model 3/4 N45BDU M1
• Up to 300 PSI
• Easily serviceable
• Bronze body

"WATTS" WATER PRESSURE REDUCING VALVE * Model 3/4 N45BDU M1 * 3/4" double union NPT threaded union female inlet and outlet * Reduces incoming water pressure to protect plumbing components and reduce water consumption * Up to 300 PSI * Easily serviceable * Bypass feature permits the flow of water back through the valve into the main * Bronze body

Watts Water Technologies N45BU Water Pressure Reducing Valve

Watts Water Technologies N45BU Water Pressure Reducing Valve Review

Watts Water Technologies N45BU Water Pressure Reducing Valve Feature

• pressure regulator water valve prssre wtr reducing red

Series N 45. Standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 F. to 180 F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. 3/4'' Female threaded union inlet x 3/4'' NPT Female outlet.

Campbell Hausfeld #GR004400AJ Bottom Pressure Gauge

Campbell Hausfeld #GR004400AJ Bottom Pressure Gauge Review

Campbell Hausfeld #GR004400AJ Bottom Pressure Gauge Feature

• Campbell Hausfeld #GR004400AJ Bottom Pressure Gauge
• CAMPBELL HAUSFELD

Bottom Pressure Gauge.

Raptor Blast Bottom Mount Pressure Gauge, 1/4" Stainless Steel 3500PSI

Raptor Blast Bottom Mount Pressure Gauge, 1/4" Stainless Steel 3500PSI Review

Rapter Blast Bottom Mount Gauge is for use with air, gas, oil or water. The glycerine filling helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.

Specifications:

• Raptor Blast Bottom Mount Gauge
• 3500 PSI
• 1/4'' Stainless Steel

Square D #fsg2j21 30/50 Psi Pressure Switch

Square D #fsg2j21 30/50 Psi Pressure Switch Review

Square D #fsg2j21 30/50 Psi Pressure Switch Feature

• Square D #FSG2J21 30/50 PSI Pressure Switch
• SQUARE D

30/50 PSI Standard Pressure Switch, 1/4" - 18 NPSF Internal Thread Opening, For Electrically Driven Water Pumps.

Wayne Home Equipment 66016-WYN Pressure Gauge

Wayne Home Equipment 66016-WYN Pressure Gauge Review

2'' diameter, for readings up to 200 lb. 1/4'' pipe connection.

Tru-flate Mini Air Line Pressure Gauge

Tru-flate Mini Air Line Pressure Gauge Review

Tru-flate Mini Air Line Pressure Gauge Feature

• Calibration range 0-200 PSI
• Back mounting inlet
• 1/8" NPT connection
• White dial face with English and Metric markings

- Calibration range 0-200 PSI - Back mounting inlet - 1/8" NPT connection - White dial face with English and Metric markings

Interstate Pneumatics G2022-060 2 -1/2 Inch 60 PSI - 1/4 Inch NPT Bottom Mount Pressure Gauge

Interstate Pneumatics G2022-060 2 -1/2 Inch 60 PSI - 1/4 Inch NPT Bottom Mount Pressure Gauge Review

Interstate Pneumatics G2022-060 2 -1/2 Inch 60 PSI - 1/4 Inch NPT Bottom Mount Pressure Gauge Feature

• Dial Diameter: 2-1/2"
• Delivery PSI: 0-60
• Inlet Thread: 1/4" NPT
• Mounting Type: Bottom Mount

Interstate Pneumatics Pressure Gauges are extremely high quality pressure gauges. Tough construction with a 2-1/2" diameter white face. It is made tough to last and has a 2-1/2" diameter white face place for easy reading. Used for air, water, oil or other fluids, compatible with brass and bronze. Pressed steel case with shatterproof crystal and brass fitting. Mounting can be either bottom mount or center back mount. Gauges are available in pressure only, vacuum only, or compound both pressure and vacuum.

Interstate Pneumatics G2101-060 1 -1/2 Inch 60 PSI - 1/8 Inch NPT Rear Mount Pressure Gauge

Interstate Pneumatics G2101-060 1 -1/2 Inch 60 PSI - 1/8 Inch NPT Rear Mount Pressure Gauge Review

Interstate Pneumatics G2101-060 1 -1/2 Inch 60 PSI - 1/8 Inch NPT Rear Mount Pressure Gauge Feature

• Dial Diameter: 1-1/2"
• Delivery PSI: 0-60
• Inlet Thread: 1/8" NPT
• Mounting Type: Bottom Mount

Interstate Pneumatics Pressure Gauges are extremely high quality pressure gauges. Tough construction with a 1-1/2" diameter white face. It is made tough to last and has a 1-1/2" diameter white face place for easy reading. Used for air, water, oil or other fluids, compatible with brass and bronze. Pressed steel case with shatterproof crystal and brass fitting. Mounting can be either bottom mount or center back mount. Gauges are available in pressure only, vacuum only, or compound both pressure and vacuum.

Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer

Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Review

Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Feature

• 5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo tool
• Adjustable depth dial; tool-free directional exhaust; 135-inch-pounds driving power
• Nail lock-out feature eliminates dry firing; magazine holds 100 nails
• Includes ¼-inch air fitting, 1,000 1 5/8-inch nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil
• Measures 9-1/4-inches (length); weighs just 2.6-pounds; 7-year warranty

No need to buy a brad nailer and a crown stapler separately, this super-versatile nailer/stapler tool packs two tools into one handy unit. Perfect for crafts, paneling, nailing finish and trim, cabinetry and more, this tool let’s you swap nails for staplers rather than disconnecting and connecting a new tool to the compressor. In nailer mode, the unit drives brads up to a 1-5/8 inches in length for anything from stair construction to cabinet work. The stapler mode fires 18-gauge, 1-1/2-inch finish staples for easy furniture upholstering and craftwork. An adjustable depth guide sets staples and brads to desired depths quickly and conveniently. And, tool-free adjustable exhaust easily directs exhaust away from the user. --Brian D. Olson

What’s in the Box
¼-inch air fitting, 1,000 2-inch brad nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil.

Campbell Hausfeld MP6000 Tire Inflator with Gauge

Campbell Hausfeld MP6000 Tire Inflator with Gauge Review

Campbell Hausfeld MP6000 Tire Inflator with Gauge Feature

• Inflation gun, chuck, and gauge are all combined in one easy to use unit
• Clip-on design enables hands-free chuck use
• Built-in relief valve for reducing pressure in over-inflated tires
• Includes flexible hose for easier use
• Gauge has range of 10-150 psi

Keep your tires properly inflated with the Campbell Hausfeld MP6000 Tire Inflator with Gauge. The MP6000 combines an inflation gun, chuck, and gauge in one easy-to-use tool, and it comes with a flexible hose for easy use. This handy gadget can help increase the life of your tires, saving you both time and money.

This combination inflation gun, chuck, and gauge makes quick work of inflation jobs, helping extend the life of your tires.

The MP6000 Tire Inflator with Gauge At a Glance: Inflation gun, chuck, and gauge in one tool Clip-on design for hands-free use Built-in relief valve reduces pressure in over-inflated tires Gauge range of 10 to 150 PSI Includes flexible hose for easy use

Get the Most out of Your Tires
Because routine pressure checks can help extend the life of your tires, investing in a tool like the MP6000 is a smart choice. Not only will the MP6000 help you save time and money, but it will also help protect the environment by optimizing your gas mileage, and it will even help make your vehicle safer to drive.

The MP6000 combines three different tools in one compact design: an inflation gun, chuck, and gauge, which has a range of 10 to 150 PSI. It clips on for hands-free chuck use, and it features a built-in relief valve for reducing pressure in over-inflated tires.

Incredibly Easy to Use: Just Position, Pull, and Fill
The MP6000 is exceptionally easy to use. Just position the chuck on the tire stem, pull the lever on the chuck, and fill. If you wish to keep a record of the pressure results, the gauge will keep the pressure rating when you remove the chuck from the stem, and then it will clear the reading when you touch the reset button.

About Campbell Hausfeld: Making it Easier to Do it Like a Pro!
Campbell Hausfeld makes it easier for you to finish your projects like a pro. The company's history of creating quality products began in 1836, when it manufactured horse-drawn wagons and agricultural equipment. Today, the company offers a complete line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects faster and easier with Campbell Hausfeld.

What's in the Box
MP6000 tire inflator with gauge and hose.
Inflation gun, chuck and gauge are combined in one easy-to-use unit for quick and accurate tire inflation. Clip-on design enables hands-free chuck use.

Hitachi 881650 1/4-Inch NPTM 2-Inch Pressure Gauge

Hitachi 881650 1/4-Inch NPTM 2-Inch Pressure Gauge Review

Hitachi 881650 1/4-Inch NPTM 2-Inch Pressure Gauge Feature

• Well-built with a simple design
• Use for pressure regulation
• Does not shatter or crack
• 1/4-Inch NPTM
• Comes with a 30-day limited warranty

The Hitachi 881650 2-Inch Pressure Gauge is well-built with a simple design. This product will not shatter or crack and is made for your home improvement and remodeling needs. This item is used for reading pressure and withstands years of repeated use. What distinguishes this part is its intuitive, quick setup and its incredible accuracy. Use this pressure gauge with your Hitachi power tools in seconds flat and maintain the pressure of your compressor. Store this product in your garage and prepare yourself for your next home improvement project and maintain the correct pressure at all times. This gauge is easy to read and understand. The Hitachi 881650 2-Inch Pressure Gauge is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.